To improve your shopping experience today and in the future, this site uses cookies.
I Accept Cookies

Delta Bikes workshop

Here you can find an extensive list of our set price workshop jobs and complete services. We have an extremely well-equipped workshop capable of practically any job with two full time mechanics.

You can book any workshop services online 24/7 by clicking the graphics below or choosing the 'Book My Bike In' link in the Services & Workshop menu or in the footer. You can also ring 01453 545480 during store opening hours.

Complete Services

Basic Service


Initial clean and wipe down

Inspection for cracks or obvious defects

Wheels inspected and hubs adjusted as required

Tyres inspected and inflated to correct pressure

Chain measured for wear

Gears indexed and checked for efficiency

Bottom bracket adjusted as necessary

Brake pads checked and brakes adjusted as required

Drivetrain re-lubricated

All bolts/nuts checked for tension/tightness

Wheel true & tension + £20

Standard Service


All elements of our Basic Service, plus...

Hubs are stripped and serviced

Bottom bracket is stripped and serviced

Headset is stripped and serviced

Drivetrain is fully degreased using our eco bioremediation washer

Wheels are trued and tensioned

Pedal strip down & rebuild + from £20

Full Service


All elements of our Standard Service, plus...

Bike is fully stripped to bare frame

Frame is checked for alignment

All parts (where possible) are cleaned and degreased using our eco bioremediation washer

Hydraulic brakes bled

Linkage strip down & bearing replacement + from £20

Additional Services

New Bike Services

New Bike Service (Bike Purchased from Delta Bikes) - Settling in tolerances are corrected free of charge (6 weeks/100 miles)Free

New Bike Service - New bike settling in tolerances are corrected, wheels are trued/tensioned, full bolt safety check (best around 6 weeks/100 miles).£79.50

Boxed Bike Build - A bike received in a box is set up and built to PDI level. Please note that if brake hose shortening, brake bleeds, steerer cutting or a tubeless set-up is required there will be an extra charge to cover the additional labour required.from £79.50

Individual Jobs


Gear indexing£20.00

Gear Cable Replacement - Per Run External£6.50

Bottom Bracket Rebuild or Replacement£27.00

Crankset Fit/Chainring Fit (if crankset removed)£15 - 27.00

Cassette Swap (Carried Out on Complete Bike)£11.00

Cassette Swap (Wheel Only Supplied)£6.00

Chain Shorten and Fit£11.00

Drivechain Degrease£36.00

Front Mech Fit + Gear Tune£15 + 10.00

Rear Mech Fit + Gear Tune£15 + 10.00

Shifter Fit + Gear Tunefrom £15 + index

Pedal Fit (Free of Charge If You Spend £30 and over + On New Pedals)£8.00

Pedal Strip Down Servicefrom £25.00

Chain Guide Fit/Set-Up (ISCG Type)from £22 - 45.00

Chain Guide Fit/Set-Up (BB Type)from £22 - 45.00


Disk Brake Bleed (Per Brake with Fluid Included)£27.00

Hydraulic Hose Shortening (Per Brake)£8.00 + fittings

Brake Pad Change including Brake Adjustment (Per Brake)£20.00

Disk Rotor Truing (Per Rotor)£8.00

Brake Set-up/Adjustment (Per Brake)£14.00


Headset Rebuild or Replacement£27.00

Headset Fit (Frame Only/Press-in Cups Only)£12.00

Fork Fit£27.00

Handlebar Swap£15.00

Grip Fit£5 - 10.00

Bar Wrap£24.00


Wheel True (Wheel Only)£16 - 20.00

Wheel True (On Bike or With Tyre Fitted)£27.00

Wheel True (Wheel Only with Broken Spokes) - Variable£POA

Wheel Building (Per Wheel)£49.50

Wheel Building (Per Wheel – Carbon Rim)£55.00

Hub Service – Front£22.00

Hub Service – Rear£33.00

Hub Service – Internal Hub Gear (Alfine, Rolhoff setc)POA

Chris King Hub Service – Front£27.00

Chris King, I9 Hydra, DT Swiss Hub Service – Rear£40.00


Puncture Repair (Wheel Only, Single)£9.00

Puncture Repair (On Bike, Per Wheel)£11.00

Tyre Fit - As per puncture repair aboveSee Notes

Tubeless Conversion (Per Wheel)£16.50 - 30.00

Tubeless Conversion Fluid Top-Up and Re-Seal (Per Wheel)£13.00

Tubeless Conversion including Tyre Liner/Insert Install (Per Wheel)£20 - 36.00


Pannier Rack Fit£20.00

Full Mudguard Fit£26.00

Race Blade Type Mudguard Fit£20.00

Cycle Computer Fit (Wired)£20.00

Cycle Computer Fit (Wireless)£15.00

Basket Fit£15.00

Frame Preparation

Bottom Bracket Shell Rethread + Face£36.00

Bottom Bracket Rethread£24.00

Headtube Face£30.00

Headtube Ream£30.00

Crown Race Face£24.00

Disk Mount Face (Per Mount)£24.00

Frame Services

Hanger Straightening£8.00

Frame Alignment Check£6.00

Dropout Alignment (Per Set)£10.00


→ Prices are for labour only and do not include parts or consumables unless stated.
→ We aim to assess and/or complete your job within 3 working days from your booking in date.
→ Whilst you wait services (such as puncture repair and tyre fits), are dependent on a mechanic being on site and available. Please call beforehand if critical.
→ If your job is time-critical, or you have an event, you must mention this prior or at the time of booking.
→ For services/variable jobs/or anything where an extra cost is involved, you will be contacted by phone prior to any work taking place - costs/recommendations will be run past you before proceeding. → If you change your mind or don't wish to proceed, the bike will be returned with no work having taken place, with no charge.
→ All work is guaranteed for 3 months.
→ If a product is fitted that requires settling in tolerances to be corrected (i.e new gear or brake cables, hub replacement etc) - a free of charge 6-week check over will be provided.